xiaorgeek.com

  Free shipping on orders over 1KG |  service@xiaorgeek.com | Coupon code "XIAORGEEK" for 10% off our robot car

  • Overview
  • In The Box
  • FAQ

Note: 


1. Please download the tutorials directly from the QR code in the manual.


2. Some countries can't ship batteries, we will send battery cases instead of batteries. You need to buy the battery like the link of this specification, 12V, more than 5A in your country.


3. The SD card is pre-burned with the Raspberry Pi 4B firmware. If you want to use the Raspberry Pi 3B/3B+ motherboard, please re-burn the Raspberry Pi 3B/3B+ firmware. Please contact us by email(service@xiaorgeek.com) to get firmware.


4. For sensor version,the infrared sensor and ultrasonic sensor avoidance module is included. No motherboard version of the default A1 manipulator.
         
    


Feature:


1. Real-time video transmission, two-axis pan/tilt tool allows the camera to move at any angle.


2. Support iOS/Android App and PC to remote control by connect WIFi or Bluetooth.(Only the phone can use Bluetooth mode).


3. Designed with 4-DOF robot arm and 2-DOF robot pan-tilt platform, enjoy much of the freedom of the control angle.


4. 5DBi External WiFi Antenna gain high signal intensity and long transmission distance, more fast and steady, brings you real time.


5. Multi Speed Control System for you to control the speed of the robot.


6. Adopt high quality 12V 350rev/min powerful motor, the maximum load is up to 8 Kg, which support continuous power for robot.


7. The new second-generation HD camera, 720P resolution, 1 million high-definition picture quality, large-size CMOS, compared with the generation of cameras, the viewing angle is increased by more than 50%, with more full picture information and clearer video pictures.


8. Hd camera allows you to take photos (on phone) and record video (on computer).


9. Power system: Double dc gear motors, planetary gear box, 12W, 1.5W, Degree of climbing: 57°.


10. Provide detailed installation tutorials and complete source code for secondary development. If you have any questions, contact us and you will have a professional technical team to guide you.


 


Description


Product Name: Raspberry Pi 4B TH WiFi Robot Car


MCU: Raspberry Pi 4B


Working Voltage: 12V Lithium battery(Not include)


Motor Drive: L298P two high-power motor driver chip


Compiler Environment: C/Python/Scratch


Charging Type: Direct charging


Wireless Communication: 802.11b/g/n,150Mbps


Frequency Range: 2.400-2.4835GHz


Signal range: 80M


Camera: Second-generation Hd camera with manual adjustment of focus


Support: iOS app, Android app, PC


Size: 300*230*233mm(L×W×H)


Weight: 4500G


 

About the motherboard we will ship according to the version you choose.


 


Standard Version with A1 Robot ArmPackage:


1 x Tank Chassis with motors


1 x PWR.A53.B power supply and motor driver shell board


1 x 8G Micro SD card


1 x Second-generation HD Camera


1 x Battery Box (Not include battery)


1 x USB cable


1 x 4 Dof Robot Arm(Type: A1)


2 x 9G Servo motor


1 x MICRO MINI USB transfer Network port Cable


1 x 9G Servo Bracket


8 x Nylon column


1 x Instructions


Some Wireway


A set of screw and nut


-


In addition, there are three packages to choose from.


Standard Version with A2 Robot ArmPackage:


1 x Tank Chassis with motors


1 x PWR.A53.B power supply and motor driver shell board


1 x 8G Micro SD card


1 x Second-generation HD Camera


1 x Battery Box (Not include battery)


1 x USB cable


1 x 4 Dof Robot Arm(Type: A2)


2 x 9G Servo motor


1 x MICRO MINI USB transfer Network port Cable


1 x 9G Servo Bracket


8 x Nylon column


1 x Instructions


Some Wireway


A set of screw and nut


 


Sensor Version with A1 Robot ArmPackage:


2*IR Sensor


1*Ultrasonic module(Inckude bracket*1, DuPont line*4)


1 x Tank Chassis with motors


1 x PWR.A53.B power supply and motor driver shell board


1 x 8G Micro SD card


1 x Second-generation HD Camera


1 x Battery Box (Not include battery)


1 x USB cable


1 x 4 Dof Robot Arm(Type: A1)


2 x 9G Servo motor


1 x MICRO MINI USB transfer Network port Cable


1 x 9G Servo Bracket


8 x Nylon column


1 x Instructions


Some Wireway


A set of screw and nut


 


Sensor Version with A2 Robot ArmPackage:


2*IR Sensor


1*Ultrasonic module(Inckude bracket*1, DuPont line*4)


1 x Tank Chassis with motors


1 x PWR.A53.B power supply and motor driver shell board


1 x 8G Micro SD card


1 x Second-generation HD Camera


1 x Battery Box (Not include battery)


1 x USB cable


1 x 4 Dof Robot Arm(Type: A2)


2 x 9G Servo motor


1 x MICRO MINI USB transfer Network port Cable


1 x 9G Servo Bracket


8 x Nylon column


1 x Instructions


Some Wireway


A set of screw and nut

Video